Pneumatic 33º angled short magazine framing nailer ideal for prolonged use in the toughest environments

DPN9033SM

Framing Nailer

33º Stick Framing Nailer designed to drive 90mm ring shank nails in the toughest timber with a smaller magazine to help get into those tighter spaces

Sequential operating mode allows for precision placement

Pneumatic operation for consistant performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements


DPN9033SM reviewsAsk an owner

Overview

  • 33º Stick Framing Nailer designed to drive 90mm ring shank nails in the toughest timber with a smaller magazine to help get into those tighter spaces
  • Sequential operating mode allows for precision placement
  • Pneumatic operation for consistant performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements
  • Versatile magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
  • 360 degree exhaust port helps angle released air away from you
  • Quickly change how the nail sits in the wood with the tool free depth adjuster
  • Serrated and non-marking tip options

Specifications

Power Source Pneumatic
Magazine angle 33 °
Collation Type Stick
Nail diameter range 2.5-3.3 mm
Nail Length 50-90 mm
Nail head diameter 7.2 mm
Magazine capacity 38-50 Nails
Trigger Type Sequential
Operating Pressure 4.8 - 8.3 Bar
Air consumption per actuation 2.47 l
Noise LPa 1sd / Uncertainty 90.8 / 4 dB
Noise LWa 1sd / Uncertainty 99.7 / 4 dB
Noise LPa 1s, 1m / Uncertainty 86.7 / 4 dB
Vibration / Uncertainty 3.02 m/s²
Length 360 mm
Height 355 mm
Width 133 mm
Weight 3.5 kg